ACCESORIES

Filters

Showing all 8 products

View 12/24/All

Departments

Price Filter

8 products

  • 22.00

    AMP Morimoto XB Igniter

    If you're like many of us retrofitters: the setup is always changing and now your Morimoto XB ballasts can keep up! Since the igniter cord can be unplugged from the ballast, you can easily change from AMP to D2S or Vice Versa
    22.00
    22.00
  • Sold out
    15.00

    AMP to D2S HID Ballast Adapter

    We know its a pain when one of the OEM ballast fails, we also know how expensive they are, so here is a quick and cheap solution to your problem. The AMP to D2S adapters will work on the aftermarket ballasts and they are the best way to fix your problem. Note: This has a 90º angle bulb connector. If unsure feel free to contact us to confirm any compatibility issues.
    15.00
    15.00
  • Sold out
    20.00

    AMP to D2S HID Ballast Adapter Straight

    We know its a pain when one of the OEM ballast fails, we also know how expensive they are, so here is a quick and cheap solution to your problem. The AMP to D2S adapters will work on the aftermarket ballasts and they are the best way to fix your problem. Note: This has a straight bulb connector. If unsure feel free to contact us to confirm any compatibility issues.
    20.00
    20.00
  • 95.00

    D1 – D2S Morimoto Igniter Conversion

    The most desirable projectors are based on D2S bulbs, so just because your vehicle came factory equipped with a boring D1S setup, don't get stuck into thinking it has to remain that way! Specially for D1S ballasts and bulbs, please note that if you have a D3S based headlight setup, they will still work - but you will also need a set of d1s-d3s ballast to hid buld cables.
    95.00
    95.00
  • 22.00

    D2S Morimoto XB Igniter

    Like all modern OEM D1 and D2 ballasts: the XB's use igniters that are external and replaceable, which offers many advantages. The lack of high voltage transmitted through wiring drastically reduces EMI/RFI (radio interference). Total system reliability is also improved by shielding the main circuit board from the static produced by these high voltage bursts on start up.
    22.00
    22.00
  • Sold out
    20.00

    D2S to AMP HID Ballast Adapter

    These allow the use of AMP-connected (aftermarket) bulbs with your aftermarket or OEM D2S HID ballasts. Works with 99% of D2S HD ballasts that have "D2S" outputs excluding any with external igniters like the Matsushita ballasts, so to cut the crap and you would like to connect 10km of cables all together this is what you need! PS: PLEASE CONTACT US FIRST !
    20.00
    20.00
  • 25.00

    Morimoto RetroRubber Butyl Sealant

    Unlike the  OCI Butyl glue, the Morimoto Retrorubber Butyl glue has a much harder consistency. It was designed specifically for resealing headlights and this product will harden just like any OEM butyl rubber when cooled. TECH SPECS USES: Re-sealing headlights / tail lights MATERIAL: Automotive Grade Butyl Rubber ORIGIN: Yokohama, Japan COLORS: Gray or Black THICKNESS: 7.5mm (stretch to thin) LENGTH: Approx 4 Meters
    25.00
    25.00
  • 15.00

    OCI Rubber Butyl Sealant

    The OCI glue is by far the most used headlight sealant out there. It is easy to apply and most important it allows you to easily reopen the headlight if needed. TECH SPECS USES: Re-sealing headlights / tail lights MATERIAL: Automotive Grade Butyl Rubber COLORS: Black THICKNESS: 12mm (stretch to thin) LENGTH: Approx 4 meters
    15.00
    15.00